-
Seam Tape- Seals seams on building wrap and insulation
- Adds protection against air and moisture penetration
- UV-stable and sticks tight in all seasons
-
Butyl Flashing- Blocks water penetration into the wall system
- Creates a permanent, watertight seal
- Adheres securely in broad temperature range
-
Butyl Flashing- Blocks water penetration into the wall system
- Creates a permanent, watertight seal
- Adheres securely in broad temperature range
-
Seam Tape- Seals seams on building wrap and insulation
- Adds protection against air and moisture penetration
- UV-stable and sticks tight in all seasons
-
PLASTI-GRIP® PMF ANCHOR - Case of 250- Manufactured by Rodenhouse Fastening Systems
- Attaches all types of rigid insulation to concrete or masonry substrates
- 2-3/8” diameter washer head • Simple to install - Drill and Hammer
- No pins, screws, or adhesives required
- Solid plastic design reduces thermal-bridging by eliminating inefficient screws / pins
- Textured head design for basecoat adhesion when used with EIFS system
-
PLASTI-GRIP® ci PRONG WASHER – Case of 1000- Manufactured by Rodenhouse Fastening Systems
- Pre-spotting prongs for on-the-wall fastener assembly
- 1-3/4″ diameter plastic tapered plate
- Compatible with screws and nails. SHOOT IT, SCREW IT, NAIL IT!
- Flexible perimeter reduces tearing of insulation facer
- White color
- Made in USA
-
Case of 1000- Manufactured by Rodenhouse Fastening Systems
- Ceramic coating for corrosion resistance
- Self drilling for attachment to heavy gauge steel studs (12 ga. thru 20 ga.)
- Phillips drive with bugle head
-
PLASTI-GRIP® PMF ANCHOR - Case of 200
- Manufactured by Rodenhouse Fastening Systems
- Attaches all types of rigid insulation to concrete or masonry substrates
- 2-3/8” diameter washer head • Simple to install - Drill and Hammer
- No pins, screws, or adhesives required
- Solid plastic design reduces thermal-bridging by eliminating inefficient screws / pins
- Textured head design for basecoat adhesion when used with EIFS system
-
PLASTI-GRIP® PMF ANCHOR - Case of 250
- Manufactured by Rodenhouse Fastening Systems
- Attaches all types of rigid insulation to concrete or masonry substrates
- 2-3/8” diameter washer head • Simple to install - Drill and Hammer
- No pins, screws, or adhesives required
- Solid plastic design reduces thermal-bridging by eliminating inefficient screws / pins
- Textured head design for basecoat adhesion when used with EIFS system
-
THERMAL-GRIP® ci PRONG WASHER - Case of 1000- Manufactured by Rodenhouse Fastening Systems
- Pre-spotting prongs = no hand assembly required! • UV Inhibitor for exposure during course of construction.
- 2” dia. solid plastic cap design for air-barrier performance.
- Stiffened center ring prevents screw pull-through.
- Flexible perimeter flattens without tearing insulation facer.
- Optional use with Grip-Lok® Autofeed Fastening System with Bullseye® nose adaptor.
- Use with Grip-Deck® ci ceramic coated screws.
- Attaches ALL types of rigid insulation and mineral wool.
- Specified, tested or approved by all insulation manufacturers
-
96 boards per unit x 12 units = 1,152 boards XPS Residing Board 25 PSI - R Value 5With its extruded polystyrene (XPS) construction, Kingspan GreenGuard XPS Residing Board does not absorb water, is not a food source for mold, and is not subject to moisture-related damage and deterioration. An R-Value of 5.0 per inch of thickness makes it an excellent thermal insulator that increases the energy efficiency of your structures, and it retains its insulating properties over time. The board also provides an extra barrier against moisture infiltration. Choose between a square edge (CM) and an interlocking shiplap edge (SL) that helps reduce air leaks at seams and gaps.- Highest thermal performance
- R–value of 5.0 per inch of thickness provides excellent energy efficiency
- Water absorption of only 1/10% by volume
-
48 boards per unit x 12 units = 576 boards XPS Residing Board 25 PSI - R Value 10With its extruded polystyrene (XPS) construction, Kingspan GreenGuard XPS Residing Board does not absorb water, is not a food source for mold, and is not subject to moisture-related damage and deterioration. An R-Value of 5.0 per inch of thickness makes it an excellent thermal insulator that increases the energy efficiency of your structures, and it retains its insulating properties over time. The board also provides an extra barrier against moisture infiltration. Choose between a square edge (CM) and an interlocking shiplap edge (SL) that helps reduce air leaks at seams and gaps.- Highest thermal performance
- R–value of 5.0 per inch of thickness provides excellent energy efficiency
- Water absorption of only 1/10% by volume
-
48 boards per unit x 12 units = 576 boards XPS Residing Board 25 PSI - R Value 10With its extruded polystyrene (XPS) construction, Kingspan GreenGuard XPS Residing Board does not absorb water, is not a food source for mold, and is not subject to moisture-related damage and deterioration. An R-Value of 5.0 per inch of thickness makes it an excellent thermal insulator that increases the energy efficiency of your structures, and it retains its insulating properties over time. The board also provides an extra barrier against moisture infiltration. Choose between a square edge (CM) and an interlocking shiplap edge (SL) that helps reduce air leaks at seams and gaps.- Highest thermal performance
- R–value of 5.0 per inch of thickness provides excellent energy efficiency
- Water absorption of only 1/10% by volume
-
48 boards per unit x 12 units = 576 boards XPS Residing Board 25 PSI - R Value 10With its extruded polystyrene (XPS) construction, Kingspan GreenGuard XPS Residing Board does not absorb water, is not a food source for mold, and is not subject to moisture-related damage and deterioration. An R-Value of 5.0 per inch of thickness makes it an excellent thermal insulator that increases the energy efficiency of your structures, and it retains its insulating properties over time. The board also provides an extra barrier against moisture infiltration. Choose between a square edge (CM) and an interlocking shiplap edge (SL) that helps reduce air leaks at seams and gaps.- Highest thermal performance
- R–value of 5.0 per inch of thickness provides excellent energy efficiency
- Water absorption of only 1/10% by volume
-
Waterproofing Protection Board- For use on foundations to protect the waterproofing membrane from backfill damage
- Convenient fanfold configuration
- Lightweight, easy to handle, cut and apply
-
Roofing Cover Board- For use with mechanically-fastened and ballasted EPDM and TPO single-ply roof membranes on low slope roofs
- PB6HD, PB6W & PB6Plus can also be used with PVC roof membranes
- Does not absorb water or turn to mush
- UL approved
-
Roofing Cover Board- For use with mechanically-fastened and ballasted EPDM and TPO single-ply roof membranes on low slope roofs
- PB6HD, PB6W & PB6Plus can also be used with PVC roof membranes
- Does not absorb water or turn to mush
- UL approved
-
Q Series Fanfold Underlayment- Reflective Facer 1-Side- XPS performance at an economical price
- Perforated to allow moisture vapor to escape
- Provides a smooth, level nailing surface for new siding
- Lightweight- cuts clean and easy
- Available with a reflective coating that qualifies as a radiant barrier
-
Q Series Fanfold Underlayment- Reflective Facer 1-Side- XPS performance at an economical price
- Perforated to allow moisture vapor to escape
- Provides a smooth, level nailing surface for new siding
- Lightweight- cuts clean and easy
- Available with a reflective coating that qualifies as a radiant barrier
-
Q Series Fanfold Underlayment- Clear Plastic Facer- XPS performance at an economical price
- Perforated to allow moisture vapor to escape
- Provides a smooth, level nailing surface for new siding
- Lightweight- cuts clean and easy
- Available with a reflective coating that qualifies as a radiant barrier
-
Q Series Fanfold Underlayment- Clear Plastic Facer
- XPS performance at an economical price
- Perforated to allow moisture vapor to escape
- Provides a smooth, level nailing surface for new siding
- Lightweight- cuts clean and easy
- Available with a reflective coating that qualifies as a radiant barrier
-
P Series Fanfold Underlayment- Clear Plastic Facer- Superior stiffness for the smoothest finish
- Plastic facers on both sides enhance durability
- Hinged for excellent lay-flat installation
-
XP Series Fanfold Underlayment- Reflective Facer 1-Side- Superior stiffness for the smoothest finish
- Plastic facers on both sides enhance durability
- Available with a reflective coating that qualifies as a radiant barrier
-
XP Series Fanfold Underlayment- Reflective Facer 1-Side- Superior stiffness for the smoothest finish
- Plastic facers on both sides enhance durability
- Available with a reflective coating that qualifies as a radiant barrier
